| Customization: | Available |
|---|---|
| Type: | Y Type |
| Material: | ABS |
|
Still deciding? Get samples of US$ 239/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Hardware parameters
| Type | Project | Description | ||
| colour | White, red, blue, yellow | |||
| identifying | Reserved logo printing area in front Reserved logo printing area on the side Reserved logo printing area at the rear |
|||
| Size and Weight | Material | ABS Material | ||
| size | 304.7mm * 240.0mm * 165.4mm (length * width * height) in accordance with the relevant regulations on the size of safety helmets in GB/T2811-2019 standard | |||
| weight | ≤550g | |||
| Material and protective performance | Shock absorption | Designed according to GB/T2811-2019 standard | ||
| Puncture prevention | Designed according to GB/T2811-2019 standard | |||
| IP level | IP66 | |||
| Fall prevention | Falling at 2 meters does not cause functional failure | |||
| Computing and Storage | CPU | Quadrupole | ||
| RAM | 1G | |||
| ROM | 8G | |||
| storage | 32G | |||
| system | Android 10 | |||
| Communication and positioning | Communication frequency band | LTE-FDD frequency band B1/B3/B7/B8 LTE-TDD frequency band B38/B39/B40/B41 WCDMA frequency band B1/B2/B5/B8 TD-SCDMA frequency band B34/B39 EVDO/CDMA frequency band BC0 GSM frequency band 850/900/1800/1900MHz |
||
| location | Supports GPS and Beidou positioning | |||
| WIFI | Supports a/b/g/n | |||
| Bluetooth | 1,Support for Bluetooth 5.0 2,1. The safety helmet can be connected to Bluetooth headphones, which can broadcast voice announcements and answer voice calls. 3,The Bluetooth connection of the helmet can connect to Bluetooth beacons. |
|||
| antenna | 1main antenna+1 LTE diversity antenna+1 (WIFI&BT) antenna (two in one)+1 GPS ceramic antenna | |||
| interface | Data and charging port | Type-C interface | ||
| SIM card slot | Supports Nano SIM card | |||
| Battery | Battery specifications | Capacity: 3000mAh standard configuration | ||
| peripheral | speaker | Single speaker | ||
| Microphone | single microphone | |||
| camera | 2 million industrial cameras with 720 resolution | |||
| sensor | Dishat alarm | |||
| Key | ·Long press on/off/short press on/off to check battery level (with network) ·Long press to record/short press to take photos ·Short press SOS emergency call |
|||
| indicator light | Charging indicator light | ·Turn on the blue light and flash quickly ·Work blue light flashing slowly ·The red light remains on during charging ·Fully charged green light always on |
||
| parts | Power Supply | 1 5V2A | ||
| data line | Type-C 1m | |||
| Battery | 3000mah | |||
| lining | 1 pair | |||
| work environment | working temperature | -10ºC~60ºC | ||
| Working humidity | 10%~60% | |||
| Type | Project | Inputt | Output | |
| state-dependent | Power on | 1. In shutdown state 2. Long press the on/off button to turn on the machine |
1. System startup 2. Send the helmet launch message to the server 1. Accept server confirmation messages |
|
| Shutdown | 1. In the startup state 2. Long press the on/off button to turn off the computer |
1. System startup 2. Send the helmet launch message to the server 1. Accept server confirmation messages |
||
| Heartbeat | On state (every 40 seconds) | 1. Send heartbeat packet message to the server 2. The message includes: battery level, battery voltage, positioning, etc |
||
| locate information | On state (every 40 seconds) | 1. Send positioning coordinate message to the server 2. The background needs to have trajectory playback function |
||
| Alarm related | temperature alarm | 1. The motherboard temperature exceeds the threshold 2. Environmental temperature display |
The safety helmet broadcasts a temperature alarm through a speaker | |
| Unhat alarm | Cap removal sensor detected cap removal | When the hat is detached from the employee's head, an alarm sound signal will be issued to remind them. The time for the hat removal alarm can be configured according to different customer needs | ||
| Low battery alarm | The system found low battery | 1. If the safety helmet is less than 5%, a low battery alarm will be broadcast through the speaker 2. If the safety helmet is less than 1%, it will continuously broadcast a low battery alarm through the speaker for 10 minutes |
||
| Electronic fence | support | 1,1. The hat exceeds the prohibited area set by the manager, and both the backend and the hat issue a warning prompt 2,The hat enters the prohibited area set by the manager, and both the backend and the hat issue a warning prompt |
||
| cross-correlation | Electricity inquiry | The user presses a button | 1. 1. The safety helmet broadcasts the percentage of power through the speaker (only when online) 2. The safety helmet sends a power query record message to the server |
|
| Photography/Video Recording | User short press to take photos/long press to record | 1. Short press the take photo button, the shot is successful, the sound effect is played, and the upload server successfully broadcasts the "upload successful" voice in network mode 2. Press and hold for 3 seconds to turn on/off recording, and if successful, the message 'Turn on/off recording' will be broadcasted |
||
| Emergency call | The user briefly presses the SOS button | 1. 1. The safety helmet emits a warning tone through the speaker 2. 2. Call the command center with a helmet and make real-time video and voice calls 3. Until the command center hangs up the call |
||
10pro: Safety helmet with Camera Live streaming camera for construction
smart hard hat is designed according to GB/T2811-2019 standard
Smart hard hat can take pictures Bluetooth, 4G, lighting, positioning wifi microphone
Smart hard hat can also be used for temperature alarm, cap removal alarm, impact alarm, low battery alarm, electronic fence, silent alarm, battery query, video recording, photo taking, intercom, video call, LED lights, etc.
smart hard hat Application field
"smart hard hat" is widely used in electric powerconstruction,railway,steel, wharf,In many industries such as aviation and energy,
on-site workers or managers can wear A newgeneration of "smart" helmets that command and dispatch platforms for timely
and rapid interaction!
Smart hard hats typically have the following features:
Safety functions: Smart hard hats usually provide high-level protection, preventing workers from head impact, puncture, and other injuries. In addition, some smart hard hats can detect whether workers are wearing them and issue an alert as a reminder.
Communication functions: Smart hard hats typically have built-in wireless communication modules, allowing them to communicate with other devices, such as smartphones or computers, via Wi-Fi or Bluetooth.
Sensors: Smart hard hats usually contain multiple sensors, such as accelerometers, gyroscopes, and temperature sensors, to detect environmental parameters such as temperature, humidity, and light.
Data recording: Smart hard hats can record workers' working hours, location, tasks, and other data, and transmit this information to the cloud for analysis.
AR/VR functions: Some smart hard hats can be equipped with augmented reality (AR) or virtual reality (VR) functions, providing workers with more intuitive job guidance and training.
Power management: Smart hard hats usually have built-in batteries and charging management systems to ensure long-term use and fast charging.
Comfort: Smart hard hats usually have a lightweight design and breathable materials to provide a comfortable wearing experience.
){kind=link}