Customization: | Available |
---|---|
Type: | Fixed |
Payment Method: | Cash |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Basic configuration | operating system | Windows 10/11, Support Multi-Languages |
CPU | i5-42000U, Dual core four thread, low power consumption, high performance | |
Memory | Standard 8GB (16GB optional) | |
Hard disk | Solid state drive 128GB (256GB optional) | |
Home screen | 15.6-inch, resolution 1920 * 1080, capacitive touch screen, supports multi touch | |
Secondary screen | 15.6 inches, resolution 1920 * 1080 | |
Top AI camera | Optional capacitive touch screen, supporting multi touch | |
Non contact card reading module (NFC card reading) | 13.56MHz high-frequency card reading module, supporting cards | |
2D scanning | Support mainstream one-dimensional/two-dimensional barcode scanning, support scanning payment | |
Wi-Fi | support | |
Bluetooth | support | |
Ethernet | Supports 10/100/1000M | |
speaker | Built-in Speakers | |
optional function | Dual eye facial recognition camera (USB) | 2 million pixels, wide dynamic hardware, supports facial recognition, supports liveness detection |
Dual eye facial recognition camera (USB) | 5 million pixels, wide dynamic hardware, supports facial recognition, supports liveness detection | |
Secondary touch screen | Secondary screen capacitive touch screen | |
Thermal bill printer | Embedded 58mm large gear thermal bill printer (this function conflicts with the AI camera under the screen, only one can choose) | |
Thermal label printer | 58mm large gear label printer, external installation | |
AI camera on the lower side of the screen | 2 million pixels, fixed focus (this function conflicts with thermal ticket printers and can only choose one) | |
Palm swipe payment/palm vein recognition | Identification signs: palm veins, palm lines Recognition mode: upper computer verification (post comparison) 1:1 or 1: N Recognition speed: Upper computer verification (later ratio) 1:10000 less than 1 second Recognition distance: 15-30 cm directly above the device Adaptation angle: Horizontal rotation within ± 360 °, tilt within ± 10 ° Maximum user: determined by the storage capacity and performance of the upper computer Recognition accuracy: False rejection rate FRR ≤ 0.1%, false recognition rate FAR ≤ 0.0001% Interface: External, USB interface |
Basic configuration | operating system | Android 12, Supports multiple languages and system customization |
CPU | RK3588, 8nm advanced process, 8-core 64 bit architecture, maximum clock speed of 2.4 GHz, quad core 2.4GHz Cortex-A75+quad core 1.8GHz Cortex-A55 | |
GPU | ARM Mali-G610 MC4 GPU, Embedded dedicated 2D graphics acceleration module | |
NPU | 6TOPS computing power, three core architecture, supports int4/int8/int16/FP16/BF16/TF32 | |
RAM | Standard 4GB (8GB/16GB optional) LPDDR4 | |
ROM | EMMC 64GB (128GB optional) | |
Home screen | 15.6-inch, resolution 1920 * 1080, capacitive touch screen, supports multi touch | |
Secondary screen | 15.6 inches, resolution 1920 * 1080 | |
Top AI camera | Optional capacitive touch screen, supporting multi touch | |
Non contact card reading module (NFC card reading) | Wide dynamic 5 million high-definition, supports HDR, | |
2D scanning | Resolution 2592 × 1944 | |
Wi-Fi | Equipped with fill lights | |
Bluetooth | 13.56MHz high-frequency card reading module, supporting cards | |
Ethernet | Support mainstream one-dimensional/two-dimensional barcode scanning, support scanning payment | |
speaker | 2.4G+5G dual band WiFi 6 module | |
optional function | Dual eye facial recognition camera (USB) | 2 million pixels, wide dynamic hardware, supports facial recognition, supports liveness detection |
Dual eye facial recognition camera (USB) | 5 million pixels, wide dynamic hardware, supports facial recognition, supports liveness detection | |
Secondary touch screen | Secondary screen capacitive touch screen | |
Thermal bill printer | Embedded 58mm large gear thermal bill printer (this function conflicts with the AI camera under the screen, only one can choose) | |
Thermal label printer | 58mm large gear label printer, external installation | |
AI camera on the lower side of the screen | 2 million pixels, fixed focus (this function conflicts with thermal ticket printers and can only choose one) | |
Palm swipe payment/palm vein recognition | Identification signs: palm veins, palm lines Recognition mode: upper computer verification (post comparison) 1:1 or 1: N Recognition speed: Upper computer verification (later ratio) 1:10000 less than 1 second Recognition distance: 15-30 cm directly above the device Adaptation angle: Horizontal rotation within ± 360 °, tilt within ± 10 ° Maximum user: determined by the storage capacity and performance of the upper computer Recognition accuracy: False rejection rate FRR ≤ 0.1%, false recognition rate FAR ≤ 0.0001% Interface: External, USB interface |
Q1: Which Express Companies can be choosed by clients?
A1: TNT, UPS, FedEX, DHL, EMS, ARAMEX, etc.
Q2: Can buyers decide the express company that wil be used?
A2: Yes. Buyers can choose the express company they prefer or cooperated with.
Q3: Can Buyers use their own couriers or shipping agents?
A3: Yes, buyers can use their own shipping agents.
Q4: Do I need to pay taxes when receive the samples?
A4: It depends on invoice value and the customs policy of the destination country. Generally taxes will occur.
Q5: Who take care of the TAXES?
A5: Seller takes care of the taxes occur in China. Taxes occur in destination country are on Buyers' expense.
Q1: How long is the warranty on this machine?
A1: 12 months, from the receipt of our products.
Q2: What if the products are broken when they are recieved?
A2: Please notify us within 24 hours of receipt of our products if they are broken. We send new products for clients to replace without sending broken ones back, providing not damaged by users.
Q3: What if the products have problem when used for a time?
A3: We have an independent after-sales team which is specially for overseas clients. After clients' requests are received, the team will help check the root of the problem and provide the solution after analysis. Within the warranty period, we will take care of the costs and shipping charges to send new spare parts for clients to replace. After the expiration of the warranty period, free technicial support is still available, clients take care of the shipping charges and costs of the spare parts.
Q4: Can I get a longer warranty?
A4: This can be discussed, depends on quantity and price.